So you have encountered an unpleasant odor coming from the washing machine? Well, you are not alone, as most of the folks that own a washer have to go through the same. There are multiple reasons that lead to the odor, including mineral accumulation, detergent residues, and mildew formation, and that’s common with all.
Tossing your clothes in a smelly washer can make them stinky, and you should avoid it at all cost! Here is a definitive guide to clean a smelly washing machine at home.
Steps to Clean a Smelly Washer
Before we hop on the cleaning process, let’s discuss the cleaning items you need during the process.
- Baking soda
Step 1: Prepare a Cleaning Mixture
Start the process by preparing a cleaning mixture. Mix ¼ cup of water and baking soda and pour the mix into the detergent dispenser. It will thoroughly clean the detergent dispenser, while the mixture travels through the tubes to the washer which prevents the foul odor.
Step 2: Add Vinegar
Now add 2-3 cups of vinegar into the washer, where you toss the clothes. Vinegar is a natural stink-remover, and it doesn’t harm the washer in any way.
Step 3: Run a Cycle
Set the washing cycle on the highest heat option, and run it for some time without any clothes. Steamy hot water and vinegar together will eliminate the stink, and the washer will get a fresh and lively fragrance. Also, the mix you have poured into the dispenser will enter the washer during the running cycle.
Step 4: Scrub and Rinse
After running the washing cycle for some time, scrub the entire washer. If you see the grime on the inner area, take some vinegar and then clean it using a gentle scrub. Rinse the washer using regular water, and let it air-dry by keeping the lid open.
Congratulations, you have made it to eliminate the smell from your washer, but how to ensure that the odor never makes its way back to the washer? Here are some easy-breezy tips you should follow to prevent the washer from stinking again.
Clean the Innards of the Washer
Cleaning the innards of the washer after washing the clothes will help you in keeping the stink at bay! What you need to do is take a scrub and clean all the inside parts to prevent mold formation. Pay special attention to the notches, i.e. the area where the rubber seal is located near the door.
Keep the Door Open
So you have a habit of closing the door after you are done with washing the load? It is one of the reasons why your washer gets smelly. Always keep the door open when you are not using the washer to maintain the flow of air inside out. The air standing inside the washer due to the closed-door can make it stink.
So you are finding it hard to clean the washer? Are you looking for a maid in Scarborough to help you in cleaning the washer and other appliances? Let the cleaning experts at Maid Forever help you.
Remove the Detergent Dispenser Regularly for Cleaning
Leaving some detergent in the dispenser will make it stubborn, and mold formation can take place, which results in a foul smell! The best way to prevent this from happening is by removing the detergent dispenser for thorough cleaning.
Wash the dispenser in lukewarm water, and install it back in place after it gets dry. You can use some soap with the water to scrape off the lingering detergent.
Prevent Dirt from Entering the Washer
While we advised you to keep the washer’s door open, you also have to prevent dirt from entering inside it. The only way to avoid dust is regular cleaning. Take an old ran and wipe the outer area of the washer using a multipurpose cleaner.
When there’s no dust accumulation on the outside, no dust can enter inside!
Cleaning a washer along with managing other household chores, can be taxing, but our maids are here to make things easier for you. At Maid Forever, we offer a plethora of cleaning services in different locations in Canada.
Whether you need a professional cleaner for deep cleaning or you are looking for someone to wash the rugs and clean the kitchen, we can be the best choice!
Booking a maid with us requires a few seconds, and you can do it straight away by clicking on the Contact Us button.